Menu

Flow switch Type VH0 with micro switch

 

Product description

Possible areas of application Flow switch Type VH0 with micro switch

Our SIKA flow switches are used for monitoring volume flows. Depending on requirements, these are available for various nominal widths and set-point ranges. Our modular approach allows product designs and options to be matched to a wide variety of applications. The broad temperature and pressure ranges, choice of materials and connection options ensure a very high level of versatility, which is why SIKA flow switches are used in so many areas:

  • Heating
  • Industrial cooling circuits
  • Water treatment
  • Potable water applications

 

Description

Function
The flow switch comprises a paddle system to whose end a permanent magnet is attached. Above this magnet is a reed contact, located outside the flow of fluid. A second magnet creates the force necessary to reset the switch back to the no flow position.
When the flow being monitored pushes against the paddle system, the paddle swings away. This changes the position of the magnet in relation to the reed contact and thus activates the contact.
As soon as the flow is interrupted, the paddle moves back to its starting position, thus activating the reed contact once again. The force necessary to push the magnet back is provided by the two magnets repelling each other. Using magnetic force instead of the usual leaf spring means that the switch is considerably more stable in the long term and much less sensitive to pressure peaks.

Micro switch
A micro switch used as switching element allows a higher electrical switching capacity than a reed switch. The resetting force required by the paddle system is produced by a leaf spring.

 

Technical features

Technical features

 
Switching function Changeover contact
Switching hysteresis 10...30 %
Pressure rating PN 25
Medium temperature -20...110 °C
Ambient temperature -20...70 °C
Electrical connection Plug connector EN 175301-803-A incl. cable socket
Switching current max. 5 A
Switching voltage 250 VAC
Rating 1250 VA
Degree of protection EN 60529 IP65

Options

  • Insertion installation using soldering adapter

 

Further details and accessories can be found in the datasheet.

Contact

Contact us

 
For inquiries or further informations please contact our product specialists by using the contact form below. Thank you!
Please fill all required fields*.
 
Go to top